A running toilet can waste a lot of water and increase your utility bills. Follow these steps to fix a running toilet.
Step 1: Check the Flapper Open the toilet tank and check the flapper. If it’s worn or not sealing properly, replace it.
Step 2: Adjust the Float If the water level in the tank is too high, adjust the float. The float controls the water level and should be set so the water stops about an inch below the overflow tube.
Step 3: Inspect the Fill Valve If the fill valve is leaking, it might need to be replaced. Turn off the water supply, remove the old valve, and install a new one.
Step 4: Check the Chain Ensure the chain connected to the flapper isn’t too long or too short, which can prevent the flapper from sealing properly.
Step 5: Test the Toilet After making adjustments, flush the toilet and check if the problem is resolved. If the toilet continues to run, it might be time to call a professional.
